The lawn lamp is a kind of lamps that we often see on the lawns on the roads and streets, which not only have lighting, but also have a beautiful decorative effect. The light of the lawn lamp is relatively soft, which adds a lot of brightness to the urban green space. Nowadays, lawn lamps are used in communities, parks, and rural roads in most cities. So, what are the reasons for the popularity of lawn lights? How to prolong the service life of lawn lights?
What are the reasons for the popularity of lawn lights
1. Lawn lights are reasonably priced. The installation procedures for the traditional street lights used in the past are more complicated, such as laying circuits, etc., and the power consumption is relatively high. The lights are dim, which is not conducive to the lighting of the city.
2. The price of lawn lamps is uneven, and the price is between $30 and $150. Compared with traditional street lamps, the price is much cheaper. The reason why the price of street lamps is not uniform is not only the difference in its material, but also the choice of different brands. For consumers, the brand is also a guarantee of quality. Most lawn lights can be illuminated for eight to nine hours as long as they are fully charged, so when you choose, you can refer to the quality of lawn lights based on this. When choosing a street light, the road section to be installed should be considered. Different road sections and environments are different, so the specifications to be selected are also different. For example, the width of roads in rural areas is less than ten meters, and most of them are between four and six meters, so the wattage selected by the lamp head should be able to illuminate the road of this width.
3. The price of lawn lamps is relatively energy-saving and environmentally friendly, and the installation procedures are simpler than traditional ones. At the same time, there is no need to lay very complicated circuits. The price of solar energy mainly consists of four parts, the LED lights of the street lamp head, the street lamp pole , battery panels and controllers for lawn lights.
4. The working principle of the lawn lamp: under the control of the intelligent controller during the day, the solar panel absorbs the solar light and converts it into electrical energy after being irradiated by sunlight. The LED light source is powered to realize the lighting function. The DC controller can ensure that the lithium battery is not damaged due to overcharge or overdischarge, and has the functions of PIR human body induction, light control, time control, temperature compensation, lightning protection, and reverse polarity protection.
How to extend the life of lawn lights
1. Check the wiring of the solar street light circuit system regularly to avoid loose wiring. Check the grounding resistance of solar street lights.
2. The battery matched with the solar cell components should be used in strict accordance with the operation and maintenance methods of the battery.
3. The lighting surface of the solar cell module should be kept clean from time to time. If there is dust or other grime, rinse it with water first, and then use a clean gauze to gently dry the water stains. Do not rinse and test with hard objects or corrosive solvents.
4. In case of strong wind, heavy rain, hail, heavy snow, etc., measures should be taken to protect the solar cell modules from damage.
5. After strong wind, heavy rain, heavy snow or rainy season, you must immediately check whether the panel moves, whether there is water or water in the control room and the battery box, and pay attention to whether the equipment is working normally after a thunderstorm, and whether the charge and discharge controller is damaged, etc.
The above are the reasons for the popularity of lawn lamps and the knowledge of how to extend the service life of lawn lamps. I hope it can be helpful to everyone.